Water Management

Micro Spray Jets

Our Micro Spray Jets are great for building your own aeroponic or cloning systems. These jets deliver a 360 degree water spray using just pump pressure. They can be screwed into PVC piping or Poly tubling.

Active Aqua Round Air Stones

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Pump Filter Bags

Just insert your submersible pump into these filter bags to prevent sediment from clogging your filter or your tubing. Use of the filter bag will prolong the life of your pump. The small bag measures 9" x 7" and will hold most smaller pumps. The large...

1/2" & 3/4" Click Clamps

Use Click Clamps to prevent tubing from coming off of barbed fittings and pumps. They are available in 1/2'' and 3/4''.

Poly End Plug

These End Plugs are used at the end of your 1/2'' Poly Tubing to close it off to create pressure for your drippers, etc.. The cap is removeable and has a 3/4'' hose fitting on the end to connect to a hose for easy drip line flushing and cleaning.

General Hydroponics Dual Diaphram Air Pump

Four Valve High Output Air Pump The only air pump in the world manufactured exclusively for hydroponics systems. General Hydroponics Dual Diaphragm air pump is the only air pump in the world that is manufactured exclusively for use with hydroponic...

pH Test Strip

pH Test Strips are quick and easy to use. Just touch a strip to your nutrient solution, and match the color of the strip to the color chart. Works in seconds. They come with about 100 strips per vial.

Poly Insert Plastic Elbow

Poly insert plastic elbowINSERt x INSERT

1/4" Tubing Support Stake

4 Support Stakes Plastic stakes hold 1/4'' tubing in place next to plants. Works great into rockwool or soil.

Pressure Compensating Button Standard Drippers

Drippers are used at the end of 1/4'' vinyl tubing to control the flow of the water or nutrient solution to each individual plant site. They flow 2 gallons per hour. They maintain the same flow rates at different water pressures.

Hole Punches

Designed for comfortable use. Punches holes in 1/2'' Poly Tubing to insert 1/4'' connectors or drippers. Two punches are available, a manual punch and a professional punch. If you are punching many holes, you will want to consider the professional punch,...

Hole Plugs for 1/4" Poly Tubing

Hole Plugs are used when you need to plug holes in your 1/2'' Poly Tubing. They snap into the tubing, preventing water from coming out of the punched hole. If you remove 1/4'' drippers or 1/4'' connectors, these will completely seal the hole.